Description
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
New Customer Register Receive 5% off of All Products on 1st Purchase
The sport model to have a comfortable drive even in the winding road.
The model in the photo is DB22.
Application
Engine | B48 |
---|---|
Model Year | 19/05 - |
Remarks | Note: Due to lowering the vehicle, a radar camera irradiated range becomes narrower and TTS (ToyotaSupraSafety) malfunction may occur with misalignment of the center. |
Specification
FRONT | REAR | |
---|---|---|
Damping force adjustment | 30 steps | 30 steps |
Base valve | - | - |
Height adjustable lower bracket | ○ | ○ |
Upper mount | Spherical bearing | Spherical bearing |
Inverted/Normal type | Inverted | Normal |
Damper/Spring layout | Coilover | Separated |
Spring rate change at factory | ‐ | ○ |
Damping force adjustment with wire | - | ‐ |
Helper spring (Spring rate N/mm) |
○ ( 4.7 ) | ○ ( 19.8 ) |
Factory *2 | Test data | Adjustable range High - Low *3 |
Drivable range High - Low *4 |
||
---|---|---|---|---|---|
FRONT | Ride height *1 | 663 | 658 | 680 ~ 633 | 680 ~ 633 |
Against stock | -17 | -22 | 0 ~ -47 | 0 ~ -47 | |
REAR | Ride height *1 | 669 | ← | 689 ~ 622 | 689 ~ 622 |
Against stock | -26 | ← | -6 ~ -73 | -6 ~ -73 |
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.
Kit information
Spring of Full Kit
F | R | |
---|---|---|
Spring rate N/mm(kgf/mm) | 137 ( 14 ) | 176 ( 18 ) |
Free height (mm) | 150 | 200 |
Spring type | 直巻※専用 | Straight |
Recommended range to change spring rate N/mm(kgf/mm) | - | -20 ( 2 ) |
Specification of damper
F | R | |
---|---|---|
Damping force (Rebound/Damping)N* | 1859 / 402 | 966 / 437 |
Default position of dial | 15 | 15 |
Remaining damper stroke (Rebound/Damping)mm | 37 / 52 | 56 / 58 |
* The value of the damping force is at piston speed of 0.1m/sec.
Test vehicle information
F | R | ||
---|---|---|---|
Vehicle weight kg | 729.5 (730) | 724 (720) | |
Tire size (Air pressure) kPa | 255 / 40 - 18 ( 220 ) | 275 / 40 - 18 ( 220 ) | |
Wheel size | 9.0J × 18 | 10.0J × 18 | |
Alignment (Toe/Camber) |
Test data | in 0.4 mm / -2°23' | in 1.2 mm / -2°34' |
Standard value | in 3.1 mm ± 2.3 mm / -1°45' ± 0°30' | in 2.7 mm ± 2.3 mm / -2°00' ± 0°25' |
* Test data at HKS.
Parts List * It may be changed without prior notice.
Point
Mr. Manabu Orido (also known as Mr. Supra) set a 1.682s faster time on racing track at Fuji International Speedway with only suspension upgrade.
This suspension utilized a conventional shock absorber rather than factory electronically controlled one and a vehicle is easier to understand and to control according to the driver's intention.
Using the high rate spring provides a smooth ride without too stiff feeling and at the same time helps to translate a feedback from tires.
Using HKS traditional inverted type at the front. To ensure the stroking amount and height adjustable range, HKS designed special outer cover.
Adjustment type pillow upper allows to adjust the camber angle.
The billet aluminum upper plate is used at the rear. This is for weight saving without losing the necessary strength.
The straight wound spring is used at both front and rear allowing to easily change spring rates.
Note: Error canceler is required due to removed factory Electronic Control Shock Absorber.
Note: Ships preset to DB42. When installing to DB22, please change to test data as shown in the installation manual.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Return & Refund Policy
If you are unhappy with your purchase, as long as you contact us within 30 days from the receipt of the item, we will process your return/exchange request. Please make sure to contact us by email vicky.lan.xu@gmail.com at first.
The following items are non-returnable:
The customer is responsible for all shipping charges related to returns or exchanges, unless the item received was damaged or defective.
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If your return is approved, a refund will be processed to your original method of payment within fourteen (14) business days. The time it takes for the refund to post to your account may vary depending on your bank or credit card company.
We are unable to cancel orders once they have been shipped. If you wish to cancel an order that has already been shipped, please initiate a return once you receive the item.
If you receive a damaged or defective item, please contact our customer service team within forty-eight (48) hours of delivery to initiate a return or exchange. We will provide a return label and instructions on how to return the item.
Shipping Australia wide
Fast dispatch and delivery nationwide
Satisfied or refunded
We're local - come visit us in store today
Top-notch support
Have a question? Contact us on sales@modup.com.au
Secure payments
We accept AfterPay, ZipPay and LatitudePay